Publicité
Les langues disponibles
Les langues disponibles
Plumbers
Putty
Locknut
1. Handle Valve Installation
Remove and save the union nut, the locknut, and the crimped
washer from each handle shank.
NOTE: The valve body marked "Cold" (with blue lettered tape
attached to the tube) should be installed to the right of the faucet.
Insert the faucets into the proper mounting holes.
Apply a bead of plumbers putty or other sealant to the underside
of the faucet according to the putty manufacturer's instructions.
From the underside of the lavatory, slide one crimped washer,
and thread one locknut, and one union nut onto each valve body.
Align the faucets and then securely tighten the union nuts with a
wrench. Do not overtighten.
Remove any excess putty or sealant.
Kohler Co.
Faucet
Lavatory
Crimped
Washer
Union Nut
3
112470-2-BD
Publicité
