Volpi KV81 Mode D'emploi page 31

15.3 Lead screw greasing
Greasing of the pruner internal transmission have to be carried out by qualified personnel at customer
service.
Bring the tool to the customer service center after every pruning season, in order to make the correct
maintainance.
15.4 Moving blade replacement
•
Use only original blades, refer to customer assistance service to buy blades and original spare
parts.
•
With the battery inserted into the tool, open the blades by pressing the trigger, then switch off the
tool and remove the battery.
• Remove the circlip (3) and the pin (4) from the moving blade actuator rod:
31