JVC KD-T709BT Guide De Démarrage Rapide page 13

GETTING STARTED
1
Cancel the demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES]), the display shows: "CANCEL DEMO"
Press * ENTER.
1
[YES] is selected for the initial setup.
Press * ENTER again.
2
"DEMO OFF" appears.
2
Set the clock and date
1
Press and hold .
Press VOL +/– to select [CLOCK], then press * ENTER.
2
To adjust the clock
Press VOL +/– to select [CLOCK ADJUST], then press * ENTER.
3
4 Press VOL +/– to make the settings, then press * ENTER.
Hour Minute
5 Press VOL +/– to select [CLOCK FORMAT], then press * ENTER.
6 Press VOL +/– to select [12H] or [24H], then press * ENTER.
To set the date
7 Press VOL +/– to select [DATE SET], then press * ENTER.
Press VOL +/– to make the settings, then press * ENTER.
8
Day Month Year
9
Press to exit.
To return to the previous setting item, press
"PRESS ENTER"
.
3
Set the basic settings
1
Press and hold .
2 Press VOL +/– to select an item (see the following table), then press
* ENTER.
3 2
Repeat step until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
[SYSTEM]
[KEY BEEP] (Not applicable when 3-way crossover is selected.)
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ;
[NO]: Cancels.
[CLOCK]
[CLOCK DISPLAY] [ON]: The clock time is shown on the display even when the unit is
turned off. ; [OFF]: Cancels.
[ENGLISH]
Select the display language for menu and music information if
[РУССКИЙ]
applicable.
[ESPANOL]
By default, [ENGLISH] is selected.
[FRANCAIS]
.
Default: [XX]
5