AGA MARVEL PROFESSIONAL MP15BCG4 Serie Instructions D'installation, D'utilisation Et D'entretien page 20

Installed shelf
tang
Rear tang
(hook) on
shelf
Figure 40a
Tall bottle
storage
area
Figure 40
CAUTION
!
Make sure your cantilever shelf is secure on the shelf
supports by pressing down on the shelf before loading the
shelf.
SHELVING CONFIGURATIONS
Shelf support
slot
To remove the crisper :
Pull out until it stops. Lift up on the
front of the pan, and remove it from
the frame.
To Add or Remove a Shelf
Remove stored product from the shelf. Do not try to remove
a loaded shelf from the appliance. Grasp the shelf front with
both hands, rotate the front upward and lift out. (See Figure
40b). To install a shelf insert the shelf in the appliance and
insert the top hooks into the shelf support slots and drop
the shelf down so the hooks drop over the bottom of the
slots.
Grasp the shelf by the front with
both hands and rotate the front
of the shelf up, then lift the shelf
up and remove the shelf from the
shelf ladders.
Never try to move a loaded shelf, remove everything from
the shelf before moving. Use both hands when moving a
shelf.
20
Tall bottle
storage area
Figure 41
CAUTION
!
Door storage racks
Figure 40b