Télécharger Imprimer la page

ETNA CM244ZT/E11 Mode D'emploi page 85

Publicité

Les langues disponibles

Les langues disponibles

BEFORE USE
Before you begin
Setting the clock
• Open the door and remove the packaging material.
• Do not use the microwave oven when it is damaged, but contact
the manufacturer.
• Remove the protection foil from the outside of the microwave oven.
• Clean the inside of the oven and the accessories with a damp cloth.
Do not use abrasive cleaners or any strongly smelling detergents.
• Place the turntable in the middle of the microwave oven with the
indentation for the driving mechanism downwards.
• The microwave oven may not be used without the turntable.
When the power is first supplied to the microwave oven, you must set
the clock. In the display '00:00' will blink. The clock will work as long as
the microwave oven is connected to the mains.
1. Turn the selection button to set the right time (between 00:00 and
23:59).
After you have set the right time, you will hear a beep and the time
stops blinking. The clock has been set.
Notes
• If you want to change the time later on, you have to press and hold
the clock button. The actual time disappears and then the time will
blink in the display.
• Turn the selection button to set the new time and press the clock
button again to confirm the setting.
EN 7

Publicité

loading

Ce manuel est également adapté pour:

Cm244zt