Beamz DMX-004DII Manuel D'instructions page 8

Signal terminator.
A DMX signal terminator is recommended to avoid a bad signal caused by other electrical devices. A DMX
terminator is a XLR connector with a 120Ω resistor between pin 2 and pin 3 of the XLR connector. Connect it to the
last OUTPUT socket of the final light.
See picture:
Specifications
Outputs
Max. Load
Max. Load Channel
Power supply
Dimension
Weight
: 4
: 16A
: 6.3A
: 230Vac ~ 50Hz
: 260 x 210 x 90mm
: 2,3Kg
www.beamzlighting.com