5. TO TUNE THE STEERING TRIM
6. TO TUNE THE THROTTLE TRIM
7. TO TUNE THE STEERING DUAL RATE CONTROL DIAL
8. STEERING/THROTTLE REVERSE
STEERING REVERSE:
To reverse the direction of servo travel for steering (CH1).
THROTTLE REVERSE:
Allows you to electronically switch the direction that the motor operates in relation to the
throttle trigger. For example, if you pull the throttle trigger to accelerate forward but the model
goes in reverse, flip the Throttle Reverse
switch to make the model accelerate forward.
RUNNING YOUR CAR
STEERING TRIM DIAL
Gently pull the trigger to allow your car to
run slowly. Meantime, tune the steering
trim to allow the front wheels to be
aligned by rotating the dial.
THROTTLE TRIM DIAL
Throttle Trim is used to set the idle speed
of the car, by rotating the dial.
STEERING D/R DIAL
The D/R controls the amount of servo travel.
You should adjust this to give maximum
steering without any extra strain on the servo.
Set it to minimum first and then slowly adjust
until full steering is achieved.
THROTTLE D/R
With this dial you can adjust the the
maximum power output from your speed
control.
5