Publicité
Les langues disponibles
Les langues disponibles
• Maintain the ventilation openings in the
appliance
structure, free of obstruction.
• Never use water to wash the compressor
position, wipe it with a dry cloth thoroughly
after cleaning to prevent rust.
• Handle the appliance always with at least two
persons because it is heavy.
• Install and level the appliance in an area
suitable for its size and use.
• Make sure that the electrical information on
the rating plate agrees with the power supply.
If it does not, contact an electrician.
• The appliance is operated by a 220-240
VAC/50 Hz power supply. Abnormal voltage
fluctuation may cause the appliance to fail to
start, or damage to the temperature control or
compressor, or there may be an abnormal
noise when operating. In such case, an
automatic regulator shall be mounted.
• Only for UK: The appliance's power cable is
fitted with 3-cord (grounding) plug that fits a
standard 3-cord (grounded) socket. Never cut
off or dismount the third pin (grounding). After
the appliance is installed, the plug should be
accessible.
• Make sure that mains cable is not caught under
the
enclosure
appliance
or
in
during
2
the
built-in
and
after
Publicité
