BREIL CHRONO 1/100 Mode D'emploi page 9

The chronograph hundredths of a second hand ➅
• The hundredths of a second hand moves for 61 seconds after the measurement has
been started. After this time period, it stops at 0. The display will then change to show
one rotation every minute.
To start the chronograph
• Press button
The small second hand ➂ will move to zero at the same time as the chronograph is
•
started and will start to count the seconds. Similarly , hand ➄ will, after one minute and
one second from the start of the chronograph, change to function as the minute hand
of the chronograph.
To stop the chronograph
• Press button
• When the measured time is less than 61 seconds, the minute hand, second hand and
1/100th of a second hand of the chronograph will stop at the measured time.
• When the measured time is more than 61 seconds, the minute and second hands of
the chronograph will stop at the measured time. The 1/100th of a second hand of the
chronograph will stop at zero. The minutes and seconds can be read from the
chronograph display .
Subsequently , press button
chronograph to the measured time. It is then possible to read the time in hundredths of
a second.
To reset the chronograph
• Press button
The second hand of the chronograph ➂ will change its function to indicate the
•
continuous seconds of the current time. The other hands, ➄ and ➅ will return to zero.
again to advance the 1/100th of a second hand of the
5