EUROM PAC 7.1 Livret D'instructions page 22

TROUBLE SHOOTING
The unit does not start if I press the ON/OFF button
 Is the plug in the socket?
 Is the earth leakage circuit breaker engaged? No power?
 Is the water tank full? Empty it.
 The room temperature is lower than the set temperature; amend
the set temperature.
The unit doesn't seem to be very effective
 Measure the outlet temperature; this must be approx. 10° cooler
than room temperature.
 Is there direct sunlight? Shut the curtains.
 Are windows or doors open? Shut them.
 Are there too many people in the room? They produce heat!
 Is the space too big?
 Is there an object in the room that is generating (a great deal of)
heat? Switch it off or remove it.
 Is the filter dusty or covered in dirt? Clean it.
 Is the air inlet or outlet (hose) blocked? Make sure there is free air
flow.
The unit is making a noise
 Is the surface underneath the machine sturdy and even?
 The flow of coolant in the unit also produces a little noise. This is
perfectly normal.
The unit switches itself off
 The overheating safeguard may have switched the unit off. See
'Safety'.
Error code E0
 The temperature sensor is broken. Have it replaced. The unit
works without temperature setting.
Error code E2
 The water tank is full. Switch the unit off and empty it manually.
Switch it on again.
NEVER ATTEMPT TO REPAIR THE DEVICE YOURSELF!
When this unit reaches the end of its useful life, it should not be
disposed of with household waste. There are specific collection
points for this type of waste. You municipality can provide you
with information about how this is organised near you.
22