Publicité
1
1
POWER
(Remote Display Unit/Unité
d'affichage de télécommande/
Unidad de visualizador de
control remoto)
2
1
PLAY
PAUSE
2
(Remote Display Unit/Unité
d'affichage de télécommande/
Unidad de visualizador de
control remoto)
32
CD Operation
To Deactivate the CD
Shuttle and Listen to the
1
Radio
To listen to your factory-installed radio, turn off
the Remote Display Unit by pressing the
FREQ.
POWER button.
PWR
Notes:
•
(Remote Control Unit/
Unité de télécommande/
Unidad de control
remoto)
•
Multi-Changer Selection
You can connect and operate 2 or more (6
maximum) Alpine CD Shuttles through Ai-NET.
These Shuttles must be connected to the CRA-
1655RF using the Multi-Changer Switching
2
device (KCA-400C). If you use 1 Switching
1
device, you can connect up to 4 CD player/
Shuttles. If you use 2 Switching devices, you
can connect up to 6 CD player/Shuttles.
Press and hold the PLAY/PAUSE button for at
(Remote Control Unit/
least 3 seconds to activate the Multi-Changer
Unité de télécommande/
Unidad de control remoto)
mode.
Press the
changer indicator appears on the display.
(Remote Control Unit/
Unité de télécommande/
Unidad de control
remoto)
When you set the Modulator Unit to a
frequency which has no FM broadcast, your
audio system may produce some harsh,
interstation noises when CD playback is
stopped.
With the FM Modulator connected, there will
be a slight loss in signal strength to the
radio.
8
9
or
button until the desired player/
English
Publicité
