Imetec N4101 Instructions Pour L'utilisateur page 19

• Insert the stem until the blades are completely inserted in the mixture.
• Press speed 1 button.
• If a higher speed is necessary after starting, continue with speed 2.
• At the end of the process, release the button and wait for the blades to come to a complete stop.
• Remove the plug from the power socket.
• Clean any parts that come into contact with foodstuffs immediately as described in the chapter
'Cleaning and care'.
• Fit the whisk into its mount [Fig D].
• Place the motor body of the hand blender on the whisk support, making the triangle symbol line up
with the open symbol; turn the motor body anticlockwise until the triangle symbol coincides with the
closed symbol [Fig. E].
• Fill the beaker with liquid foodstuffs without exceeding the maximum level marking.
• Connect the power cable plug to the power socket in the wall.
• Place the whisk in the beaker [Fig. F].
• Press speed 1 button.
• If a higher speed is necessary after starting, continue with speed 2.
• At the end of the process, release the speed button used and wait for the whisk to come to a complete
stop.
• Remove the plug from the power socket.
• Clean any parts that come into contact with foodstuffs immediately as described in the chapter
'Cleaning and care'.
WARNING! DO NOT use the chopper with liquids only.
WARNING! Risk of damage to the appliance. DO NOT insert
cheese rinds.
WARNING! Risk of food contamination. DO NOT place the
bowl in the microwave oven.
• Fit the blades in the chopper bowl [Fig. G].
• Fill the bowl with solid foodstuffs without exceeding the maximum level marking indicated on the bowl.
• Fit the lid [Fig H].
• Fit the lid onto the bowl, turning the lid clockwise [Fig I].
• Place the motor body of the hand blender on the chopper lid, making the triangle symbol line up with
the open symbol on the lid; turn the motor body anticlockwise until the triangle symbol coincides with
the closed symbol [Fig. L].
• Connect the power cable plug to the power socket in the wall.
• Press speed 1 button.
• If a higher speed is necessary after starting, continue with speed 2.
USING THE WHISK
(IF APPLICABLE) (CODE DF 8030)
USING THE CHOPPER
(IF APPLICABLE) (CODE DF 8040)
EN
16