Imetec N4101 Instructions Pour L'utilisateur page 13

Dear customer, thank you for choosing our product. We feel certain you will appreciate its quality and
reliability as it was designed and manufactured with customer satisfaction in mind. These instructions
for use are compliant with the European Standard EN 82079.
WARNING! Instructions and warnings for safe use.
Before using this appliance, carefully read the instructions
for use and in particular the safety notes and warnings, which must
be complied with. Keep this manual together with its illustrative
guide for future consultation. Should you transfer the appliance to
another user, make sure you hand over this documentation as well.
NOTE: should any part of this manual be difficult to understand or
any doubt arise, contact the company at the address indicated on
the last page before using the appliance.
NOTE: persons with impaired vision may consult these instructions
for use in digital format at the website www.tenactagroup.com
Introduction
Safety notes
Key to symbols used
Description of the appliance
and its accessories
Contact with food
Cleaning before first use
Usage
Quantity and usage time
Using the hand blender
• After unpacking, make sure the appliance is intact, complete with
all its parts as shown in the illustrative guide and with no sign of
damage. If in any doubt, do not use the appliance and contact an
authorised service centre.
WARNING! Remove any communication material such as
labels, tags etc. from the appliance before use.
INTRODUCTION
INDEX
page 10 Using the whisk
page 10 (if applicable) (Code DF 8030)
page 13 Using the chopper
(if applicable) (Code DF 8040)
page 13 Cleaning and maintenance
page 13 Troubleshooting
page 14 Disposal at the end of life
page 14 Support and warranty
page 15 Illustrative guide
page 15 Technical data
SAFETY NOTES
EN
page 16
page 16
page 17
page 17
page 17
page 18
page I-II
page III
10