Imetec N4101 Instructions Pour L'utilisateur page 16

Caution/Warning
EN
Class II appliance
Closed
Refer to the illustrated guide on page I to check that your appliance is complete with all accessories.
1. Speed 1 button
2. Speed 2 button
3. Motor unit
4. Technical data
5. Stem base
6. Stem
7. Blades
The chopper (Code DF 8040) and the whisk (Code DF 8030) can be purchased as accessories
from authorised Imetec service centres or via our website at shop.imetec.com
To ensure that the appliance is used safely, please follow the guidelines given in this table concerning
the following:
• parts of the appliance intended for contact with food; the parts of the appliance not indicated in the
table are not meant to come into contact with food.
• the types of food which may be used in this appliance.
• the maximum period of time for which foodstuffs may remain in contact with the parts of the appliance
intended for contact with food.
• the maximum permissible temperature of food used in the appliance.
LIST OF PARTS
6 -7. Stem and blades
10. Whisk (if applicable)
11. Chopper lid (if applicable)
12. Chopper blades (if applicable)
13. Chopper bowl (if applicable)
14. Jug
13
KEY TO SYMBOLS USED
DESCRIPTION OF THE APPLIANCE
AND ITS ACCESSORIES
CONTACT WITH FOOD
Prohibition
Open
Closing and opening indication
8. Power cable
9. Whisk support (if applicable)
10. Whisk (if applicable)
11. Chopper lid (if applicable)
12. Chopper blades (if applicable)
13. Chopper bowl (if applicable)
14. Jug
FOODSTUFFS MAXIMUM
All 5 minutes
MAXIMUM
TIME TEMPERATURE
70 °C
40 °C