Panasonic KIT-UZ50-VKE Guide Rapide page 16

How to use
Not used
in normal
operations.
To maximise comfort while sleeping
This operation provides you with a comfortable environment while sleeping. It will
automatically adjust the sleep pattern temperature during the activation period. The indoor
unit indicator will dim when this operation is activated. This is not applicable if the indicator
brightness has been manually dimmed.
SLEEP
This operation is incorporated with the
activation timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9
hours).
16
Indicator
POWER
TIMER
FAN SPEED
Press to restore
the remote
control to default
setting.
To adjust airfl ow direction To adjust airfl ow direction
Upper direction
AIR SWING
• Do not adjust the fl ap by hand.
• For lateral direction, it is manually
adjustable as shown.
To adjust fan speed
AUTO
FAN
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
• To have low noise priority operation, select the
lowest fan speed ( ).
To switch between powerful/quiet
POWERFUL:
To reach temperature quickly
• This operation stops automatically after 20 minutes.
QUIET:
To enjoy quiet operation
• This operation reduces airfl ow noise.
• This operation can be set together with timer.
Sleep operation has the priority over OFF
(Cancel)
timer.
• This operation can be cancelled by pressing
the respective button until the sleep timer
reaches 0.0h.