Protemp PT-32-TTC Manuel D'utilisation page 9

Model PT-32-TTC:
Tools Needed:
– Medium Phillips head screwdriver.
1. Place the tank collar bracket on top of the
center plate. Be sure the mounting bolt knob is
on bottom as shown in Figure 1.
2. Insert machine screw into top hole using
Phillips head screwdriver.
3. Insert 2nd machine screw into bottom hole.
This will secure the tank collar bracket to the
center plate.
DO NOT adjust burner heads while heater is operating.
WARNING
© 2020 Pinnacle Climate Technologies, Inc.
ASSEMBLY
Tip over Switch
Assembly
Swivel
Manifold
Tank Collar Bracket
Figure 1
NEVER LEAVE HEATER UNATTENDED
WHILE BURNING OR WHILE CONNECTED
TO A FUEL SOURCE
Machine
Screws
Fuel Connector Nut
Mounting Bolt Knob
Propane Tank Top Heater User's Manual
9
Regulator
Knob