Malfunctions; Finishing Touches - VALCKE ExteriorLiving Octoo 400 Notice De Montage

Function 5: reCIrCulatIon
With the recirculation position, the water
is returned to the pool via the skimmer,
pump and valve . Choose this position
for instance when you dissolve chlorine
tablets in the skimmer and do not want
the chlorinated water to circulate through
the filter sand .
_____
Function 6: rInsInG
The rinsing happens at a pressure of
0 .9 bar . The dirty filter sand is rinsed with
this procedure . The dirty water enters
the valve via the connection . The rinsing
cycle takes about 1 to 2 min .
_____

2.4.5 Malfunctions

In the enclosed sand filter instructions,
a number of problems are mentioned
that can occur, along with the suggested
remedies . In case you can't solve the
problem yourself, please contact the
sales representative for your pool .
_____

2.5 Finishing touches

External steps
The assembly of the wooden external
steps (pine/exotic hardwood) is done
according to the drawing . The steps slide
into the cut-aways of the stair and each
step is fixed with 2 screws on each side
(4x40 / 4,5x50 mm) .
A corner piece is fixed to the steps
(50x50x25 + screw 4x40 / 4x40 mm) .
On the side of the pool where the
wooden steps will be placed you need
to attach a piece of pinewood (screws
5x80 mm) . The steps can now slide over
this piece of pinewood . It is therefore a
removable system .
For safety's sake, the outside steps
should be removed when not in use
(see 4 . Safety)
_____
ENGLISH
57