VALCKE ExteriorLiving Octoo 400 Notice De Montage page 54

manual
8
Now apply Teflon tape to the outer thread
of the manometer .
11
54
9
Unscrew the little valve at the side of the
valve to fit the manometer .
Screw the connector pieces into the
filter and the pump . Slide the fittings and
the inserts over both ends of the hose .
Connect the fittings to the connector
pieces, and then tighten the fittings .
(see the technical section:
2 .4 .3 Connections)
10
The pump and filter are interlinked by a
semi-flexible tube .