Publicité
Les langues disponibles
Les langues disponibles
Fax +32 030 9904733
Anti-frost device
Insert the plug into the power socket, turn the selector knob in pos. "I I" and turn the thermostat knob
to the anti-frost position (*): this permits convector heater switching on when the ambient temperature
falls below +5°C.
Ionising function: this produces a flow of negative ions which neutralise the positive ions in the air;
the ionising function is less evident in environments with high levels of humidity. This function is
active every time the appliance is switched on.
Never leave the appliance connected to the socket if it is not in use, especially for long periods.
CLEANING AND MAINTENANCE
Attention: before cleaning the fan heater, turn it off, remove the plug from the outlet and wait for it
to cool.
• Periodically check that the air-intake grill is not obstructed by fuzz or threads.
• Use a soft, slightly damp cloth to clean the body; do not use metal scouring pads or abrasive
products.
• To clean and maintain of the grid, it is possible vacuum cleaner paying attention not to damage the
electrical resistance.
• A special tool is required to replace the electrical cord: contact an authorized service center, also
for any repairs.
• When the appliance is not being used, cover it and put it in a dry place. it is a good idea to put it
back in its original packaging to protect it from dust and humidity.
• If you decide not to use the fan heater, we recommend that you make it inoperative by cutting the
power cord (but first make sure you have removed the plug from the electrical outlet), and make
those parts harmless that are dangerous when played with by children.
• Do not dispose of non-biodegradable products in the environment but dispose of them in
accordance with current law. At the end of its working life, the product must not be disposed of as
urban waste. It must be taken to a special local authority differentiated waste collection centre or to
a dealer providing this service. Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from inappropriate disposal and
enables the constituent materials to be recovered to obtain significant savings in energy and
resources. Bear in mind that: the body, the electrical wires are copper coated in rubber. – The
electric motor is made of iron and copper. The electrical resistance is made of iron.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't
change the page numbering. Keep the language
integrity.
9
19
/
Assembly page 9/19
Publicité
