Starting The Waxing Programme; Using The Ironer Waxing Cloth And Ironing Wax - Miele PRI 210 Mode D'emploi

en - Cleaning and care
It is essential to wax the heater plate after cleaning.
You can then switch directly to the waxing programme by pressing the temperature selec-
tion button  on the right or exit the cleaning programme by pressing and holding the
 button for at least 3 seconds.

Starting the waxing programme

Press and hold the  button for at least 3 seconds.

2 temperature selection buttons which do not take the form of temperature dots (e.g. )
are displayed.
To start the ironer waxing programme, press the temperature selection button on the

right.
The ironer will then switch to the waxing programme.
To deactivate the waxing programme, press the  button and then keep the  button
pressed for at least 3 seconds.
When the ironer has reached a temperature of 180 °C, the  button begins to flash. The
waxing programme is then ready to begin.
Press the flashing  button to start the waxing programme.

The heater plate can then be waxed using the ironer waxing cloth.
If waxing has been successfully carried out in the waxing programme for a period lasting
at least 40 seconds, the maintenance interval for prompting the cleaning and waxing of
the heater plate (indicated by a red symbol ) will be reset.

Using the ironer waxing cloth and ironing wax

Sprinkle some ironing wax into the pocket of the ironer waxing cloth.

Use the ironing wax sparingly to prevent the ironing cloth around the roller from becoming
too smooth.
184
180 °C is shown in the display.