LENCO LS-410WA Manuel De L'utilisateur page 21

Care
Turntable Body
When the turntable body is dirty or dusty, first disconnect the AC
•
adapter and then wipe off the dirt and dust with a soft, dry cloth.
Do not use benzenes, thinners, etc.
•
When storing the product for a long time, disconnect the AC adapter
•
from the outlet and wrap the product in plastic; do not allow it to
become damp; the drive belt should be removed to prevent unequal
stretching.
Stylus Tip
• If dirt and grime are stuck to the stylus tip, clean it
with a commercially sold brush.
• We recommend using a stylus cleaner
(not included) if the stylus tip is considerably dirty.
Clean the stylus tip by moving the brush from the
rear to the front of the stylus tip.
Replacing the Stylus
It's suggested to replace the stylus after 400 hours of use.
Removing the Stylus
In addition to the deterioration of sound quality, records may also
•
be damaged as the cartridge's stylus tip wears down.
Be sure to disconnect the product's AC adapter from the outlet.
•
When replacing the stylus, hold the headshell and the cartridge
•
body tightly. Rotate the front of the stylus in a forward and down
motion.
20