Publicité
Les langues disponibles
Les langues disponibles
Problem
Possible cause
The motor runs,
The machine is in
but the chain does
the protection
not cut correctly,
mode to protect
or the motor stops
the PCB.
after around 3 sec-
onds.
The battery is not
charged.
The chain is not
lubricated.
Incorrect battery
storage tempera-
ture
14
TECHNICAL DATA
Voltage
No load speed
Guide bar length
Chain pitch
Chain gauge
Drive links
Chain oil capacity
Weight (without battery
pack)
Chain
Guide bar
Battery model
Charger model
English
Solution
Release the trigger
and start the ma-
chine again. Do
not force the ma-
chine to cut.
Charge the battery.
Refer to the bat-
tery and charger
manual for correct
charging proce-
dures.
Lubricate the
chain to decrease
the friction. Do
not let the guide
bar and the chain
operate without
sufficient lubri-
cant.
Cool the battery
pack until it de-
creases to the am-
bient temperature.
48 V DC
20 m/s
16'' (400 mm)
3/8" LP (9.5 mm)
.043" (1.09 mm)
56
200 ml
7.9 lbs (3.6 kg)
90PX056X/CL14356
164MLEA041/
M1431656-1041TL
BAM704 and other BAM
series
CAM803 and other CAM
series
15
LIMITED WARRANTY
LIMITED WARRANTY
GARANTIE LIMITÉE
Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of three (3)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to misuse,
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in
accordance with the owner's manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade
sharpening;
5. Normal deterioration of the exterior finish due to use or
exposure.
HELPLINE:
Warranty service is available by calling our toll-free helpline,
at 1-855-470-4267.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of the
purchaser. It is the purchaser's responsibility to pay
transportation charges for any part submitted for replacement
under this warranty unless such return is requested in writing
by Greenworks.
USA address:
Greenworks Tools
P.O. Box 1238
Mooresville, NC 28115
15
3
YEAR
ANS
AÑOS
GARANTÍA
LIMITADA
Canadian address:
Greenworks Tools Canada Inc.
1110 Stellar Drive Unit 102
Newmarket, ON, L3Y 7B7
EN
Publicité
