Publicité
Les langues disponibles
Les langues disponibles
Electric connection
-
The plug must be protected by a circuit breaker of 16 A. Connect the appliance
directly to a wall plug socket. The use of adaptors, multiple sockets and/or
extensions is not recommended.
DANGER ELECTRIC SHOCK !
-
-
Before connecting the appliance to an electricity source, ensure that the voltage
and frequency values given on the panel correspond to those of the electrical
network. The maximum permissible voltage difference is +/- 10%
-
The appliance must be connected to the equipotential bonding system (grounding)
-
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
Starting up:
-
Prior to first use, clean the appliance carefully with a clean humid cloth and an
adapted detergent. Rinse and dry.
Switch on with main switch turn the knob from the position "0" to required position
-
to reach the required temperature.. Pilot lamp will light. Main switch lights when
the device is in electricity. Pilot lamp lights when the thermo spirals are on. Pilot
lamp goes out when the device reaches required temperature. Switch the device
off by turning the knob into position "0" and switch over the main switch.
-
Let the device cool down once service off
WARNING ! Danger of burns!
Plate and all elements in contact with it reach very high temperatures.
-
Be cautious it can result projections of grease or hot air.
-
If not in use disconnect the power cord of the appliance.
6. Cleaning and maintenance
6.1 Safety instructions
- Before servicing (clean, maintenance, repair) unplug the appliance
- Caustic detergents, sodium bicarbonate are forbidden for the cleaning of your
appliance.
- Check regularly the power cord.
- Never dip your appliance in liquid.
WARNING !
Not direct washing with water jets. (Neither jet under pressure)
Version 010415
18
Publicité
