Philips PERFECTCARE PURE GC7600 Mode D'emploi page 10

Les langues disponibles

ENGLIsh

To activate the ECO mode, press the ECO button. The light in the

ECO button goes on.

To switch back to the 'OptimalTemp' setting, press the ECO button again.

For the shortest ironing time, we advise you to use the 'OptimalTemp' setting.

Safety auto-off (specific types only)

The safety auto-off function automatically switches off the appliance if it has

not been used for 5 minutes, to save energy.

IMPORTANT: Replacing the ANTI-CALC cartridge

ANTI-CALC replacement light

It is very important that you replace the ANTI-CALC cartridge when

the ANTI-CALC cartridge replacement light starts flashing and the

appliance starts beeping.

Note: The cartridge lasts 3 months on average, but this depends on the

hardness of the water you use and on how many hours you iron.

The ANTI-CALC replacement light starts flashing and the appliance starts

beeping to indicate that the ANTI-CALC cartridge needs to be replaced.

You can still continue steam ironing for 15-30 min. (depending on

the hardness of the water used) when the ANTI-CALC replacement

light flashes and the appliance beeps. However, the steam output will

diminish and ultimately the steam generator stops producing steam to

prevent scale build-up that would permanently damage your appliance.

To let the appliance produce steam again, you have to replace the

ANTI-CALC cartridge. If you do not want to replace the ANTI-CALC

cartridge, you have to use demineralised water or descaled water from

the IronCare. In that case, you need to leave the exhausted cartridge in

the compartment.

Replacing the ANTI-CALC cartridge

Switch off the appliance and let it cool down.

Follow the steps in chapter 'Before first use - Placing the

ANTI-CALC cartridge'.

Cleaning

To properly maintain your appliance, clean it regularly.

Clean the appliance with a moist cloth.

To easily and effectively remove stains, let the soleplate heat up and

move the iron over a moist cloth.

Tip: Clean the soleplate regularly to ensure smooth gliding.