Publicité
Les langues disponibles
Les langues disponibles
HOW TO USE
BEFORE TURNING THE UNIT ON
• Take the air purifier out of the box and remove the clear protective plastic bag.
• Place the air purifier on a firm, level surface.
• Plug the power cord into a household electrical outlet.
POWER BUTTON AND FAN SPEED SETTINGS
• To turn the air purifier on, press the power
• This air purifier has an auto mode and 3 manual fan speed settings: low (1), medium (2), high (3). The higher the fan
speed setting, the faster the air will be purified. To select or change fan speed, press the fan speed
desired setting is reached. See the auto mode/particle sensor section below for using the auto mode feature.
UV-C TECHNOLOGY WITH ON/OFF
The optional UV-C technology kills germs, viruses, and bacteria by penetrating its DNA, resulting in the microorganism's
death or the inability to reproduce. Press the
button again to turn the UV-C technology off.
AUTO MODE/PARTICLE SENSOR
To select the auto mode/particle sensor function, press the
sensor sensor button will illuminate and the fan button LED will turn off. The auto mode/particle sensor automatically
adjusts the fan speed based on indoor air quality. The room air quality is displayed as green (good), yellow (elevated), or red
(bad). When using the auto mode/particle sensor, if the room air quality is green, the air purifier operates on low speed; when
yellow, on medium speed; when red, on high speed. Once the room air quality improves, the fan speed will reduce based on
the corresponding room air quality level. To exit the auto mode/particle sensor function, press the
mode/particle sensor button LED will turn off and the fan button will illuminate.
IONIZER SETTING WITH ON/OFF
Ion particles have a positive or negative charge that attaches to airborne particles, making them easier to be captured by
the filtration system. Press the ionizer
use. Press the ionizer
button again to turn the ionizer off.
NOTE: Dust particles may accumulate on surfaces around the air purifier when the ionizer is in use. These dust particles can
be vacuumed or wiped away with a soft, damp cloth.
NOTE: You may hear occasional popping sounds when the ionizer is used. This is normal.
NOTE: The ionizer produces less ozone than the UL-established limits of 0.05 ppm. Ozone may be harmful around birds and
small pets. To prevent ozone buildup, use the ionizer feature in a well-ventilated area.
NIGHTLIGHT
The nightlight has 3 options. Press once to turn the blue nightlight on. Press again to turn the blue nightlight ring and the
display lights off. Press a third time to turn the display lights on.
TIMER
Press the timer
button until the desired timer setting is lit on the display. The timer
following settings: 2 hours, 4 hours, 8 hours, 12 hours, and off. To cancel the timer at any time, press the timer
until all timer LEDs are off. The air purifier will operate continuously when the timer function is off.
button.
button to turn the UV-C technology on. The blue LED will glow. Press the
auto mode/particle sensor button. The auto mode/particle
button to turn the ionizer on. The blue light will glow to indicate the ionizer is in
6
button until the
fan button. The auto
button will cycle through the
button
Publicité
