HoMedics TOTALCLEAN AP-T40-CA Mode D'emploi Et Informations Sur La Garantie page 10

5. Place the tabs at the bottom of the
grille cover into the base of the air
purifier. Gently push the grille cover
until it snaps into place.
CLEANING AND MAINTENANCE
PARTICLE SENSOR
6. Plug the power cord into a standard AC outlet. Turn the air purifier
on. Press and hold the ionizer
the indicator.
NOTE: The particle sensor needs to be vacuumed monthly under normal usage.
1. Unplug the air purifier.
2. Remove the particle sensor door.
3. Vacuum the particle sensor using the brush attachment of your vacuum cleaner.
4. Reattach the particle sensor door.
5. Plug the power cord into a household electrical outlet.
10
button for 3 seconds to reset