Costway JV10936 Instructions De Montage page 3

GENERAL INFORMATION & TIPS
1. Please read the assembly instructions prior to assembling the chair.
2. To avoid damage, assemble the chair on a non-abrasive surface
such as a carpet.
3. Make sure all bolts are tightly fastened before the chairs are used.
4. This chair is not for commercial use.
Please make sure you have all parts before beginning
assembly. Please wait until all steps are completed before
tightening the bolts.
1. Use the long end of the Allen
wrench to fasten Allen bolts
loosely and quickly.
2. Use the short end of the Allen
wrench for final tightening.
A Phillips head screwdriver is necessary for
assembly (not included).
a. Before beginning the
gluing process, place the
crossbars into each of the
holes in the leg frame. to
ensure the crossbars fit
correctly. Once this is
complete, take the crossbars
out of the wood frame.
EN
03