Publicité
Les langues disponibles
Les langues disponibles
STEP #6
DOOR UNIT(S) MUST BE
ASSEMBLED INSIDE OF
SOLARIUM.
Slide upper door track F-3 into
wheels of sliding door C-3. Slide
lower door track G-3 and make
sure inserts are close enough to
the frame to attach.
Bb-3 to affix the plastic stopper
H-3 on each end of top door rail
F-3. Use Oo-3 screws to affix
upper door rail and cap Nn-3, at
each end of top rail door.
Note: Make sure wheel bearing
rolls easily in the track, if not
check if the wheels are tightly
bolted
Kk
Use bolt
STEP #5
Set right rafter T-3 over last bracket then
secure it with Bb-3 screw and continue
screwing through joint K-3 with the Bb-3
screw. Secure to Q-3 bracket with self-
tapping screw (PQ-3). Repeat on left side
with rafter S-3.
Publicité
