Publicité
Les langues disponibles
Les langues disponibles
TOOLS REQUIRED:
Screwdriver (Philips #2), Knife, File (smooth), Needle-nosed pliers, Rubber mallet, Step ladder
(minmum 6' in height), Spatula, Power drill, Tube of silicon, Drill bit 5/16" cement (according to
surface), Round file, flat 2"x4"x8" wood, (Optional : Tapping Screws).
BEFORE STARTING:
Ensure that you have a solid base, such as concrete or wooden deck, not slanted more than 1" per 8'. Avoid
installing unit adjacent to trees or a sloped roof, as snow and ice may slide onto the solarium and cause it to
collapse. Please don't destroy boxes until completely assembled.
STEP #1
Decide the position of the door frames before assembly according to where you intend to slide the door. At
the front of the solarium, use frame D3 for the opening of the door and B3 for the direction of the door when
open. Use E3 between frame ends and use two (2) K3 joints for corners, with the screw holes upward.
Look for the sticker on the door frame D3 that indicates which side is upward. (See sketch on
previous page)
2x E-3
D-3
NOTE:
When placing the door frame opening, make sure
the inserts on the frame are on the inside and on the upper
half of the frame of the solarium because the door will be
set on the inside due to clearance.
NOTE:
When sliding the connectors, shake the frame so that they
will slide easily. Do not use tools to force. If needed, clean
the paint with a file and make sure the ends of the frame
and joints are not bent or warped. If so, use the needle-
nosed pliers to straighten or a file to make it slide.
TOP VIEW /
VUE DU HAUT
B-3
A-3
K-3
D-3
A-3
2x E-3
A-3
K-3
B-3
Publicité
