peerless-AV SC550 Installation Et Assemblage page 10

Mounting Flat Panel Display
• Always use an assistant or mechanical lifting equipment to safely lift and position the display.
Remove M8 nut and M8 washer from rear of universal
7
adapter plate (B). Hook universal adapter plate (B) onto
column assembly.
Secure universal adapter plate to column assembly by
reinstalling M8 nut and M8 washer as shown in detail 5.
Tilt Adjustment
Adjust tension knobs on sides of mount to desired
8
tension to enable tilt adjustment and balance your
display size and weight. Push or pull from top or
bottom of display to adjust tilt as shown. The tilt
can be adjusted to a maximum of 15°.
Retighten tension knob.
WARNING
M8 WASHER
M8 NUT
DETAIL 5
TENSION KNOB
10 of 35
B
A
ISSUED: 02-25-11 SHEET #: 009-9048-4 06-16-14