Perel GIK06N Mode D'emploi page 3

Keep this device away from rain, moisture,
•
splashing and dripping liquids. Never put
objects filled with liquids on top of or close to
the device.
Always disconnect mains power when the
•
device is not in use or when servicing or
maintenance activities are performed. Handle
the power cord by the plug only.
All cords and cables should be routed so that
•
they will not be walked on or pinched by items
placed upon or against them. Pay particular
attention to the point where they exit the unit.
Remove all flammable materials close to the
•
device before switching on.
Do not install the device on a flammable
•
surface (linoleum, carpet, wood, paper,
cardboard, plastic, etc.).
Protect this device from heat sources such as
•
radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce
heat.
Do not remove the cover under any conditions.
•
There are no user-serviceable parts inside.
Never operate this device when its cover is
removed.
Do not operate a visibly damaged device. Do
•
not attempt to operate this device if the power
cord has been frayed or broken.
Always mount this device in a safe and stable
•
manner. Mount this device in an area that will
allow proper ventilation. Allow about 15 cm
between this device and a wall.
This device should only be serviced by qualified
•
service personnel.
V. 06 – 16/12/2020
GIK06N
3 ©Velleman nv