Before use
Please read these instructions carefully before using your mini-bar.
This is intended for household use and is to be installed inside.
Installation
Location
When choosing where to install your mini-bar, you must ensure that the floor is flat and closed, and that
the room is well ventilated with a temperature between 16 and 32°C. Avoid installing it next to a heat
source, such as a stove, boiler or radiator, etc.
Also avoid places subject to direct sunlight.
If you place your mini-bar in an annex or a garage, make sure that the place is not damp because conden-
sation could appear on it.
The mini-bar door is reversible and can open to the right or to the left, depending on the chosen location.
Never cover the device with a sheet or blanket.
For optimal operation, the room temperature should be between 20 and 25°C
Placement – fitting
Position the device in front of the desired location and gently slide it into position.
When installing the product, it is very important to ensure that it is well ventilated.
At least 200cm³ must be left for ventilation.
Pour assurer une bonne convec-
tion, la distance entre le mur et le
produit doit-être au minimum 2cm.
Également un espace pour la cir-
culation de l'air de 5cm doit être
prévu en dessous du produit.
Un espace doit également être
prévu au-dessus du produit pour
l'évacuation de l'air chaud.
Page 7