Polygroup SUMMER WAVES Manuel Du Propriétaire page 3

8. Remove the canister top cover of the SFX Series Skimmer pump.
10. Put the vacuum adapter over the strainer and press downward.
A vacuum will be generated that will keep the vacuum adapter in place.
12. Keeping the hose end underwater, slowly slip the end of the hose
through the skimmer opening and attach the end of the hose to
the vacuum adapter's hose connection.
14. A vacuum is now generated from the vacuum head all the way to the filter cartridge.
15. Slowly push the vacuum head across the pool to remove debris. Check the water flow at the return fitting while vacuuming.
16. When the water flow from the return fitting is noticeably reduced, the filter cartridge is likely to be partially clogged. Turn off the pump, remove the filter cartridge
and gently brush/rinse under running water. Replace with a new cartridge if necessary. Repeat the process until the pool is thoroughly cleaned.
OWNER'S MANUAL
9. For Summer Waves SFX Skimmer Pump, remove the weir from the canister.
11. Place the open end of the flexible hose up to the return fitting and start to fill the
hose with water. Keep filling the hose until there is no more air inside the hose.
13. Hand tighten the hose clamp.
3