Diamond ACTIVE LITE Manuel D'instructions page 22

CLEANING
Clean your DIAMOND ACTIVE LITE lid immediately after use if possible to avoid
dried-on food residue.
Clean all parts after each use:
• Wash the parts with hot water and washing up liquid.
• Rinse with hot water.
You can easily disassemble the lid for more thorough cleaning:
• Unscrew the 2 thumb nuts under the lid.
• Now the glass can be removed. Now the gaskets are easy to remove
- they can be refitted after cleaning.
• The valves can easily be taken apart and reassembled. Make sure
that you put the steel ball back into the safety valve (opening only
visible from below) and the metal cylinder back into the pressure
release valve.
We recommend cleaning the DIAMOND ACTIVE LITE lid in the sink by hand.
You can easily wash the pot in the dishwasher. Do not clean the gasket in the
dishwasher, otherwise it will harden prematurely.
For stubborn food residue, soak the parts in soapy water before cleaning. You
can also use a little stove cleaner to carefully remove tougher stains.
EN
22
SAFET Y VALVE
PRESSURE RELEASE VALVE