Publicité
Les langues disponibles
Les langues disponibles
TROUBLE SHOOTING
Problem
3 lights on
Descaling notification
steadily
The car does not work
3 lights
Thermostat defect NTC
flashing
Temperature not correct
Tank is empty / not well inserted
No steam is
generated
Steam nozzle clogged
Too much powder in the filter and
filter holder cannot be fixed well
Coffee runs
There is powder in the seal ring of
out around the
the seat of filter holder
edge of the
filter holder
Filter holes are blocked
Filter holder not linked well
Tank is empty / not well inserted
Coffee powder is too pressed
Coffee comes
Coffee powder is too fine
out too slow
Too much coffee in the filter
or no coffee
Filter holes are blocked
comes out
The holes of the water exit in the
seat of filter holder are blocked
Water leakage
Drip tray is filled up
on the bottom
Water tank is not mounted well
of machine
Strong and
Water tank is empty and pump
unusual noise
cannot take water
Temperature not correct
The steam
Used skimmed milk
cannot froth.
TECHNICAL FEATURES
•
Power supply: AC AC 220-240V
•
15 Bar, pump ULKA
•
3 filters: pods, powder 1 or 2 cups
•
Milk frother, Cup warmer
WASTE OF ELECTRIC AND ELECTRONIC EQUIPMENT
The product is made of non-biodegradable and potentially polluting substances if not properly disposed of; other parts can
be recycled. It's our duty to contribute to the ecological health of the environment following the correct procedures for
disposal. The crossed out wheelie bin symbol indicates the product complies with the requirements of the new directives
introduced to protect the environment (2002/96/EC, 2003/108/EC, 2002/95/EC, 2012/19/EC) and must be properly
disposed at the end of its lifetime. If you need further information, ask for the dedicated waste disposal areas at your place
of residence. Who does not dispose of the product as specified in this section shall be liable according to the law.
Cause
~
50-60Hz. Power: 1230-1465W
Solution
Carry out the descaling operation
Contact assistance
Wait steam indicator light stop flashing.
Fill the tank / Insert well the tank pressing down
Remove erogation tube (5).
With a needle, remove any encrustations in the
steam outlet hole. If the problem persists, perform
descaling.
Turn off the machine and wait for it cool down,
clean the seat of filter holder as described in
"Cleaning" section.
When using agin, pour less coffee in the filter.
Clean the filter
Make sure to fix well the filter holder.
Fill the tank / Insert well the tank pressing down
Press the coffee powder less
Use thicker coffee powder
Insert less coffee
Clean the filter
Switch on without filter holder and let water
come out. If problem persists, perform descaling.
Please clean the drip tray
Insert well the tank pressing it down
Pour water in water tank
Wait steam indicator light stop flashing.
Use whole milk
21
Publicité
