Publicité
Les langues disponibles
Les langues disponibles
FUNCTIONS
REGULATION OF EROGATION TIME
Erogation time is fixed to 25 seconds for 1 cup and 38 seconds for 2 cups.
To change this setting, for one of the buttons (9) or (10), follow this procedure:
- Place one or 2 coffee cups under the spout (22)
- Select the button (9 -
all the duration of the erogation.
- Release the button when the quantity of coffee is the desired one. The lights flash 3 times. At subsequent
operations the machine will dispense according to the new setting.
COFFEE TEMPERATURE ADJUSTMENT
-
Keep pressed the steam button (11 -
The machine goes on "setup" function and the lights of the 3 buttons flash in turn.
-
-
Press button (9 -
o
button (9 -
o
buttons (9 -
o
buttons (9 -
-
After a few seconds, the lights flash in turn, at this point press to set the new brewing temperature.
o
button (9 -
o
button (10 -
o
button (11 -
-
The light of button (9) flashes 3 times to indicate that the new temperature has been set.
WATER HARDNESS ADJUSTMENT
The hardness of the water affects the frequency of the descaling operation (page 11). The hardness is preset to
"Medium". If you use mineral water (less hard) or tap water (harder):
-
Keep pressed the steam button (11 -
The machine goes on "setup" function and the lights of the 3 buttons flash in turn.
-
-
Press button (10 -
o
button (9 -
o
buttons (9 -
o
buttons (9 -
-
After a few seconds, the lights flash in turn; press to set water hardness.
o
button (9 -
o
button (10 -
o
button (11 -
-
The light of button (10) flashes 3 times to indicate that the new hardness has been set.
CLEANING -
Unplug the power cord from the electrical outlet and allow the unit to cool down
before cleaning. Do not wash parts of the appliance in the dishwasher.
The machine must be cleaned regularly and daily, to keep it efficient and to extend the life of the appliance.
TANK AND HOUSING
Clean the fixed parts of housing (6) with a soft damp cloth. Do not immerse the main body in water. In any
case, avoid splashing water or other liquids from reaching those parts. Periodically clean the tank (2) and the
lid (1) with a soft sponge and dish detergent. Rinse and dry well before reassembling them.
GRID AND DRIP COLLECTING CONTAINER
Remember to empty the container (16) at least once a week. There is also a floater (14): if the floater comes
) or (10 -
) for which you want to set the erogation time, and keep pressed for
) for 5 seconds.
), the machine shows the temperature currently set:
) on: low temperature 70±5°C
) and (10 -
), (10 -
) and (11 -
): set low temperature 70±5°C
): set medium temperature 75±5°C
): set high temperature 80±5°C
) for 5 seconds.
), the machine shows the hardness currently set:
) on: low hardness
) and (10 -
), (10 -
) and (11 -
): set low hardness
): set medium hardness
): set high hardness
) on: medium temperature 75±5°C
) on: high temperature 80±5°C
) on: medium hardness
) on: high hardness
19
Publicité
