Publicité
Les langues disponibles
Les langues disponibles
Install outer case in window
1.
Place outer case in window. Lower sash until it rests behind
behind window sill.
A. Top channel
B. Window sash
C. Bottom channel
2.
Expand both curtains to contact the window frame. Install four
wood screws 31/32". Two in each upper right and left of the
curtains.
3.
Install three wood screws 31/32" in the top mounting channel
NOTE: To make screws easier to drive, drill a pilot hole into the
sash through clearance hole in curtains.
installation bracket and adjust them to proper length ,then use
6.
Use a wood block between the leveling bolts and the wall if the
wall is weak or if the weight of the air conditioner falls between
the studs in the wall.
Complete Installation
1.
Insert the foam seal behind the top of the lower window sash
and against the glass of the upper window.
A
A. Top of lower window sash
B. Foam seal
B
7
Publicité
