Operation
if necessary.
Pairing your device with Bluetooth
1.
Place the speaker to the Bluetooth enabled device no more than 33
feet (10 meters) apart. Make sure the speaker is in 'On' mode.
2.
Press and hold button for one second until the button is
illuminated and flashing white.
3.
Activate your mobile device's Bluetooth function by referring to
your mobile device's user guide for details. Find the device named
"Furrion LIT" in your mobile Bluetooth device's list and select to
connect.
NOTE: The button will flash white during the searching process. If
connected successfully, the button will be illuminated in white for 3
seconds and then disappear.
4.
Press and hold the button for 3 seconds to cancel the pairing mode.
NOTE: The speaker will automatically remember the last 10 paired
devices. Press both and - buttons for 5 seconds to clear the memory.
Pairing your Speaker with NFC
1.
Enable your mobile device for NFC pairing. Refer to your device's
owner's manual for details if necessary.
2.
Place the mobile device close to the NFC detective area on the
speaker. Search "Furrion LIT" from the available NFC devices list.
3.
Confirm the connection on your device.
11
Playing Audio
Make sure at least one mobile device has been connected to the speaker
before playing audio.
1.
Press and hold the
speaker will be connected to the mobile devices automatically if it
has been previously paired.
2.
Use the controls on your mobile device to control the audio playback
or use the buttons on the speaker to pause audio, navigate tracks
and control volume.
●
Press
●
Press + button to increase the audio volume. Press and hold +
button to go to the next track.
●
Press - button to decrease the audio volume. Press and hold -
button to go to the previous track.
Using Party Mode
Two speakers can be paired for stereo.
1.
Identify which speaker will be the main speaker and which speaker
will be the auxiliary speaker. Your device only needs to pair with the
main speaker.
2.
Pair your device with the main speaker. See section "Pairing your
Speaker to a Mobile Device" for details.
CCD-0005526 REV. 11.29.2022
button until the 'power on' tone sounds, the
button to pause or resume the playback.