Furrion LIT FBS012N-BL Guide De Démarrage Rapide page 9

Before Using
● Connect one end of the provided power adapter to the power inlet at
the bottom of the speaker, connect the other end to a 5V DC power
source. The speaker will be fully charged in approximately 3.5 hours.
NOTE: The button remains white during the charging process and
turns off after fully charged.
Operation
Turn On/Off your Speaker
Turning On: When speaker is in Off mode
● Press and hold the
sound. The LED will flash white for a second and then disappear.
Turning Off: When speaker is in On mode
● Press and hold the
sound.
NOTES:
● If the speaker is not connected to a source device and is not plugged
into a power source, the speaker turns off after 15 minutes of
inactivity.
● If the speaker is not connected to a source device and is plugged into a
power source, the speaker turns off after 30 minutes of inactivity.
● If the speaker is connected to a source device and is not plugged into a
power source, the speaker turns off after 1 hour of inactivity.
● If the speaker is connected to a source device and is plugged into a
power source, the speaker turns off after 1 hour of inactivity.
Pairing your Speaker to a Mobile Device
Prior to using the speaker for the first time, you must pair it with a
mobile device. The following steps describe the pairing instructions for
a typical mobile device. Refer to your device's owners manual for details
CCD-0005526 REV. 11.29.2022
button for 1 seconds. A 'power on' tone will
button for 1 seconds. A 'power off' tone will
10