Schumacher Electric SPI6 Traduction De La Notice Originale page 7

10. FEATURES
2
1
7
11. CONTROL PANEL
DIGITAL DISPLAY
The digital display indicates the status of the battery and charger. See Display Messages
for a complete list of messages.
NOTE: During charging, the display will go into sleep mode and will not display any
messages. To turn the display back on, press the display button.
LANGUAGE BUTTON
The digital display will show the battery's voltage and percentage of charge. Press the
button for 5 seconds to select the language on the display. (EN→ DE→ FR).
LED INDICATOR
GREEN LED solid (CHARGING): The charger is connected and is charging a battery.
GREEN LED pulsing (CHARGED/MAINTAINING): The battery is fully charged and the
charger is in Maintain Mode.
GREEN LED flashing: The charge has aborted. (See Aborted Charge section.)
NOTE: See Operating Instructions for a complete description of the charger modes.
12. OPERATING INSTRUCTIONS
This battery charger must be properly assembled in accordance with the
WARNING
assembly instructions before it is used.
The charger does not have an ON/OFF switch. The On and Off commands are controlled by
plugging the SPI6 into an AC electrical wall outlet only after the battery connections have
been made.
Do not start the vehicle with the charger connected to the AC outlet, or it
IMPORTANT
may damage the charger and your vehicle.
BATTERY INFORMATION
This charger can charge 6-celled lead-acid batteries with rated capacities of 1.2-130 Ah.
NOTE: This charger is equipped with an auto-start feature. Current will not be supplied
to the battery clamps until a battery is properly connected. The clamps will not spark if
touched together.
See instructions for charging a battery inside a vehicle (Section 6) or outside of the
vehicle (Section 7).
3
4
5
6
•
7
1. Digital display
2. Hook attachment
3. Language button
4. Charging status LED indicator
5. Battery clamp quick-connect
6. Ring terminal quick-connect
7. AC Power cord
•