Bartec CAK-PH-A Consignes D'installation page 8

CAK-PH-A Off pipe cable gland kit and end seal
 Make a small cut over and under each bus wire. Take care not to damage the bus wires.
 Carefully make an incision into the edges of the heating element. Take care not to damage the bus wires.
 Pull off the bus wires while holding the heating element.
 Remove any remaining heating element that sticks to the bus wires.
NOTICE
Risk of malfunction of the heating system. Before you continue, make sure that the bus wires are intact and not nicked or damaged.
 Twist the bus wires.
21-59CZ-7D0002 Notice Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Installation Instructions
12
13
14
Page 6 / 21