Publicité
Les langues disponibles
Les langues disponibles
• Programming code Memories
*50xx*
xx = 00 to 09 According to memory selected
followed by #11#
or
#10#
followed by 1 to 15 digits Desired Autodial number
terminated by
Factory setting
To erase a memory:
*50xx*
xx = 00 to 09 According to memory selected
terminated by
• Remote control code Test
*97xx*
xx = 00
Telephone acknowledgement:
1-second transmission of frequency of 1244Hz
followed by:
1-second transmission of frequency of 622Hz
Note: at the end of this remote control sequence the telephone loudspeaker is cut.
• Remote control code Erase
*98xx*
xx = 00
Telephone acknowledgement:
xx = 02
• Remote control code Special
*99xx*
xx = 00
xx = 01
Note: this remote control code is used to reactivate the telephone loudspeaker when it has been cut by a
loudspeaker test (*9700*)
NFC227A*TEL2
\\SERVEUR MAX\\ Notices NFC \ NFC227 TL2 \ NFC227A-TEL2.DOC
All manuals and user guides at all-guides.com
Seeks tone
2-second pause before dialling
*
Sequence terminator
All memories blank
*
Sequence terminator
REMOTE CONTROL CODES
Test microphone and loudspeaker
Return telephone to factory setting
*
After about 1.3 sec
Memories M0-M9 erased
Clear down the telephone automatically
Reinstate loudspeaker
59 /64
Publicité
