Publicité
Les langues disponibles
Les langues disponibles
The sequence of buttons to be keyed on the keypad of a remote telephone, DTMF type, connected to the
telephone to be programmed.
Take care during programming, the presence of busy tone can clear down the telephone automatically.
IMPORTANT: Before any programming, key the access code :
5
0
*
During memory programming , the combination #11# represents the recognition of a continuous tone with a
frequency of 440 Hz ± 100Hz (standard) before dialling.
This is the standard for UK and many other countries but in some other countries #10# may be applicable
instead, whereby a 2-second pause is inserted rather than tone recognition.
A
UTODIAL NUMBERS
5
0
*
< M > number of memory from 0 to 9 affected with the buttons 0 to 9
With the exception of the stations has two buttons or button 2 is affected at the M5.
• Remotely checked phones : 8 memories M1 to M8 available by pushing keys 1 to 8 without pushing call
button.
• Phones without remotely checked facility : 10 memories M0 to M9 by pushing keys 0 to 9 without
pushing call button.
For full keypad telephone, to assigne button
NFC227A*TEL2
\\SERVEUR MAX\\ Notices NFC \ NFC227 TL2 \ NFC227A-TEL2.DOC
All manuals and user guides at all-guides.com
BASIC PROGRAMMING
9.
1
2
*
A
UTODIAL NUMBERS
Key the combinaison:
0
1
*
< N > autodial number from 1 to 15 digits.
(M0
TO
Key the combinaison:
0
<M>
*
F
OR FULL KEYPAD TELEPHONE
CAN BE ALLOCATED TO THE
P
ROGRAMMING OF THE
2
4
*
3
4
(M1)
#
1
(
-
M9)
HANDS
FREE TELEPHONES
#
1
NOTE
,
THE MEMORY
BUTTON
« R »
BUTTON
to memory M1 key the combinaison:
0
0
51 /64
*
1
#
<N>
)
1
#
<N>
M1
*
*
*
Publicité
