MV Agusta BRUTALE RR Manuel D'utilisation page 92

4.4.5. "TC" Mode
Press "SET" in order to access to "TC" mode, then
press "SET" for over four seconds until "TC LEVEL"
appears. The current traction control level is the same
as the one shown on the display.
WARNING
This operation may only be performed while
the engine is off, the gears are in neutral, the
motorcycle is stationary, and with the feet on
the ground. Do not set the display functions
while riding as it may cause loss of control,
resulting in an accident, personal injury or
death.
Press "OK" for less than four seconds: the traction
control level rises up to the next value. Such value may
range between 0 and 8.
Press "OK" for over four seconds to confirm the
selected traction control level.
All manuals and user guides at all-guides.com
OPERATION
- 91 -
4
4