5.8.1. Rebound damper (rear suspension)
See the table in the enclosed sheet for rebound damping adjustment. Refer to the number of clicks from
the reference position, which is found by fully rotating the screw clockwise and then counterclockwise
until you hear the first click.
CAUTION: Do not force the adjusting screw past its fully clockwise position. Rotate the adjust-
ing screw counterclockwise to decrease damping, clockwise to increase damping.
WARNING: The rear shock absorber
contains highly compressed gas. Do
not try to open or disassemble it in
any way. Failure to heed this warning
may lead to an explosion, resulting in
5
an accident, personal injury or death.
All manuals and user guides at all-guides.com
ADJUSTMENTS
- 118 -
5
CLICK!
CLICK!
CLICK!