Publicité
Les langues disponibles
Les langues disponibles
E N G L I S H
6 Maintain tools with care
Keep the tools in good condition and clean for better and safer
performance. Follow the instructions for maintenance and changing
accessories. Inspect the tool cords at regular intervals and, if damaged,
have them repaired by an authorized D
controls dry, clean and free from oil and grease.
7 Store idle tools
When not in use, power tools must be stored in a dry place and locked
up securely, out of reach of children.
8 Check for damaged parts
Before using the tool, carefully check it for damage to ensure that it will
operate properly and perform its intended function. Check for
misalignment and seizure of moving parts, breakage of parts and any
other conditions that may affect its operation. Have damaged guards or
other defective parts repaired or replaced as instructed.
Do not use the tool if the switch is defective. Have the switch replaced
by an authorized D
9 Remove the batteries
Remove the batteries when not in use, before servicing and when
changing accessories.
10 Have your tool repaired by an authorized D
This power tool is in accordance with the relevant safety regulations.
To avoid danger, electric appliances must only be repaired by qualified
technicians.
Additional safety instructions for batteries
• Do not attempt to recharge batteries.
• Do not open or mutilate batteries for any reason.
• Do not expose batteries to water.
• Do not expose batteries to fire.
• Do not store batteries in locations where the temperature may exceed
40 °C.
40
All manuals and user guides at all-guides.com
WALT repair agent.
E
WALT repair agent. Keep all
E
WALT repair agent
E
Publicité
