TOOL FRANCE Promac 214AB-M Mode D'emploi page 6

SPECIFICATIONS
Drilling capacity mm
Spindle taper
S i w g n
Spindle stroke
p S e e s d
Distance Spindle nose to table
Distance Spindle nose to base
Spindle sleeve
Column diameter
Table size
M t o r o
Overall dimensions
W e g i t h
Noise test carried out in accordance with se
When the drill press is operated under normal, uniform load, the sound level (IEC 651 - IEC 804) is below 70 dB.
However, this sound level can increase for various materials difficult to machine so the opera
wear ear protec
DESCRIPTION OF THE MACHINE
With a PROMAC drill press, you have a universal machining center at your disposal which can be used for
manifold metal cu ng tasks that normally would require several machines. When using and maintaining the
machine correctly, its safe fu
come.
Do not put the machine into
deeply understood and having yourself familiarized with the
For this purpose, the various machine func ons should be tested out in dry run without
FEATURES
1. The specific design of the machine allows drilling with many different tools. The machine is equipped with
stepped pulleys to change the spindle gear range.
2. The machine has been precisely manufactured and, for experienced operators, it opens up unlimited
possibili es of use due to its high ease of handling.
3. Direct manual spindle stroke for the drilling process.
4. The large column provides the machine with a high rigidity and it guarantees a high accuracy.
5. The machine head is made of matured high-density gray cast and ensures long-term accuracy.
6
2 4 1 A B-M
26 mm
MT 3
2 0 8 m m
115 mm
5 1 - 0 8 2 0 4 p r m
690 mm
1220 mm
62 mm
92 mm
428 x 475 mm
. 0 5 7 k W
1750x460x840 mm
1 4 6 g k
n 1.7.42u of the Machinery Direc ve 2006/42/EG.
ing and its high machining accuracy will be guaranteed for many years to
un having carefully read the opera ng instruc
ng procedures.
g staff should
and un having
the machine