TOOL FRANCE Promac 214AB-M Mode D'emploi page 11

Speed adjustment
The desired speed can be selected by changing the position of the vee belt according to the
table stated below.
1. Turn off the machine.
2. Open the vee belt guard.
3. Loosen the set screw.
4. Slide the motor towards the machine head housing, to slacken the vee belt.
5. Position the vee belt in the desired groove of the pulleys.
6. Tension the vee belt by sliding the motor (approx. 1 cm slack).
7. Close the vee belt guard and start the machine.
Spindle speeds
Spindle
Motor
11