LEGRAND care NOVO Go Mode D'emploi page 33

NOVO Go DOCK
3
Get started with NOVO Go DOCK
1 Remove NOVO Go DOCK from the box.
2 Examine the contents for missing or defect items. If something is missing or defect, speak with your
Legrand Care distributor.
3 Keep NOVO Go DOCK on something stable near a wall socket.
4 Open the lid on the bottom of NOVO Go DOCK.
5 Remove the plastic protection from the Micro-USB connector.
6 Connect the Micro-USB connector and carefully attach the cable to the hooks, refer to the image
below.
7 Connect the AC adapter to the wall socket. NOVO Go DOCK sets to on automatically.
8 Pair NOVO Go DOCK with NOVO Go, refer to
9 Put NOVO Go in NOVO Go DOCK.
User Manual
3.3 Pair NOVO Go DOCK and NOVO
NE41 21003-02 v2.0
Go.
6