LEGRAND care NOVO Go Mode D'emploi page 11

NOVO Go
4
Accessory
The same procedure is applicable to the two accessories.
Attach Accessory
4.1
1 Put NOVO Go on something stable, with the alarm button side up.
2 Position the accessory above NOVO Go. Refer to the illustration below.
3 Make sure that the holes on the side
Refer to 2 Your NOVO Go
4 Push until you hear click sounds on the two sides.
RELATED CHAPTER(S)
3 Get Started with NOVO Go
User Manual
point in the direction of the loudspeaker
1
NE41 21002-02 v2.0
.
B
9